Features & Details
| 🔌 1-METER 50Ω COAXIAL CABLE | 1-meter shielded cable with male BNC connector splits into color-coded red and black clips. |
| 🐊 REINFORCED ALLIGATOR CLIPS | Nickel-plated steel jaws with spring bite clamp securely onto test pins and terminal lugs. |
| 🛡️ FULLY INSULATED BOOTS | Flexible silicone insulation boots protect against accidental electrical shorts during probing. |
| 📶 CLEAN SIGNAL TRANSFER | Low capacitance lead preserves waveform integrity for audio and low-frequency scope testing. |
About this item
Electronic Prototyping, Waveform Analysis & Signal Debugging
BNC Alligator Clip Cable, 1M Oscilloscope Test Lead by Professional Series
Ensuring dependable accuracy during daily operations requires professional equipment engineered to withstand demanding laboratory and industrial environments. The BNC Alligator Clip Cable, 1M Oscilloscope Test Lead (Hantek HT324) by Xin Tester provides verified stability, user-friendly operation, and certified safety compliance across standard maintenance protocols. Discover our complete line of diagnostic and testing instruments in the Oscilloscope Instrument catalog.
Trigger Flexibility
Advanced edge, pulse width, video, and slope trigger modes isolate intermittent glitches and timing jitter across digital communication buses.
Bright High-Res Display
Multi-color TFT LCD screen with grid graticule displays multiple channel traces, trigger levels, and automatic parameter measurements clearly.
💡
Engineering Insight: Bandwidth Rules & Sampling Ratios
To capture signal rise times accurately without amplitude attenuation, oscilloscope bandwidth should be at least 3 to 5 times higher than the fundamental clock frequency under test.
Ordering & Model Verification
Confirm bandwidth (MHz), channel count, and built-in function generator options before configuring your unit in the right-side panel.
Related technical collections:
Oscilloscope Instrument |
Accessories
Related products:
HT30A 3 m oscilloscope adapter cable |
Hantek HT311 adapter
FAQs
Q1: What are alligator clip cables typically used for?
A1: The HT324 is ideal for hands-free oscilloscope measurements where you need to clip onto component leads, terminal blocks, or wire ends and monitor signals over extended periods — common in troubleshooting, burn-in testing, and educational labs.
Q2: Can I use the HT324 for automotive diagnostics?
A2: Yes, the insulated alligator clips are well-suited for clipping onto automotive sensor terminals, fuse box contacts, and relay pins. The shielded cable helps reject ignition noise for clean waveform capture.
Q3: How should I connect the ground clip for best results?
A3: For best signal quality, connect the black (ground) clip to the nearest ground point on the circuit under test. Use the shortest possible ground lead to minimize ground loop area and reduce noise pickup.
Q4: Is the cable length sufficient for bench work?
A4: The 1-meter length is optimized for bench-top use, providing ample reach between your oscilloscope and test circuit without excessive cable clutter. For longer runs, consider the HT30A 3-meter cable or a BNC extension.
BNC Alligator Clip Cable, 1M Oscilloscope Test Lead (Hantek HT324) by Xin Tester
$12.99
6–12 Month Warranty
Repair & Refund support available for most products.
Free Worldwide Shipping
Ships within 3 business days.
Taxes & Duties
Buyer responsible for local import fees.
24/7 After-Sales Support
Technical assistance & video guidance within 24h.
BNC Alligator Clip Cable, 1M Oscilloscope Test Lead (Hantek HT324) by Xin Tester
$12.99
Features & Details
| 🔌 1-METER 50Ω COAXIAL CABLE | 1-meter shielded cable with male BNC connector splits into color-coded red and black clips. |
| 🐊 REINFORCED ALLIGATOR CLIPS | Nickel-plated steel jaws with spring bite clamp securely onto test pins and terminal lugs. |
| 🛡️ FULLY INSULATED BOOTS | Flexible silicone insulation boots protect against accidental electrical shorts during probing. |
| 📶 CLEAN SIGNAL TRANSFER | Low capacitance lead preserves waveform integrity for audio and low-frequency scope testing. |
Electronic Prototyping, Waveform Analysis & Signal Debugging
BNC Alligator Clip Cable, 1M Oscilloscope Test Lead by Professional Series
Ensuring dependable accuracy during daily operations requires professional equipment engineered to withstand demanding laboratory and industrial environments. The BNC Alligator Clip Cable, 1M Oscilloscope Test Lead (Hantek HT324) by Xin Tester provides verified stability, user-friendly operation, and certified safety compliance across standard maintenance protocols. Discover our complete line of diagnostic and testing instruments in the Oscilloscope Instrument catalog.
Trigger Flexibility
Advanced edge, pulse width, video, and slope trigger modes isolate intermittent glitches and timing jitter across digital communication buses.
Bright High-Res Display
Multi-color TFT LCD screen with grid graticule displays multiple channel traces, trigger levels, and automatic parameter measurements clearly.
💡
Engineering Insight: Bandwidth Rules & Sampling Ratios
To capture signal rise times accurately without amplitude attenuation, oscilloscope bandwidth should be at least 3 to 5 times higher than the fundamental clock frequency under test.
Ordering & Model Verification
Confirm bandwidth (MHz), channel count, and built-in function generator options before configuring your unit in the right-side panel.
Related technical collections:
Oscilloscope Instrument |
Accessories
Related products:
HT30A 3 m oscilloscope adapter cable |
Hantek HT311 adapter
Customer Reviews
Add a review
You must be logged in to post a review
Log In
Discover More from Xin Tester
Hantek Universal Oscilloscope Probe Kit (80MHz-250MHz)
Price range: $9.86 through $36.89
🚚 Delivery: as soon as Fri. Nov 6
UNI-T UT89X Professional True RMS Digital Multimeter (1000V/20A)
Price range: $43.69 through $78.99
🚚 Delivery: as soon as Fri. Nov 6
Hantek HT306 Universal Automotive Breakout Leads (6-Way, 4 Sizes)
Original price was: $49.99.$43.89Current price is: $43.89.
🚚 Delivery: as soon as Fri. Nov 6
Reviews
There are no reviews yet