Standard Sieve Stack Kit
Three to four sieves across the mesh range plus a pan + lid for each cut — graded distribution in one run.
The complete set, shown as one kit
The Standard set turns one sieve into a graded breakdown. Stack three to four sieves in mesh order, shake, and weigh each retained fraction. A pan + lid per cut collects and caps so you can read the full gradation curve.
Every piece from one catalogue
Each component links to its own product page and opens in a new tab — buy the bundle as a validated set, or pick the parts you need.
3–4 Test Sieves (mesh range)
Across the mesh range you specify, for a graded particle-size distribution.
Browse sieves →
One short workflow, one catalogue
A particle-size result is not one tool — it is a five-step workflow. The kit collects every piece so nothing falls between vendors.
Sample Prep
Collect and reduce the bulk sample to a representative test portion.
Weigh
Record the mass of the test portion before and after each cut.
Pre-dry (optional)
If the sample is damp, dry it in the forced-air oven so particles do not clump.
Sieve
Stack the sieves in mesh order and shake to separate by size.
Analyse
Weigh each fraction and compute the gradation curve.
Before you specify the set
How many sieves are in the stack?
Three to four across the mesh range you specify. We confirm the exact set with you before ordering so you are not guessing which meshes to buy.
Do the pan and lid match the sieve diameter?
Yes — every pan and lid is sized to the matching sieve frame, so they nest and seal.